DNA V50 Release Notes

Modified on Wed, 18 Nov at 11:34 AM

DNA V50 adds a Work/Service Order column to the Jobs report, a job number search on the planning sheet, customer notes on delivery note certificates and operation notes on the touch screen. It lets you mark customer specs as subcontract, speeds up the sales order and job lists, and fixes issues with stock levels, job costing, sales orders and Sage credit notes.

What's new

A new look for the shop-floor touch screens

The touch screens have a cleaner, modern design and now fit tablets in both portrait and landscape, with no sideways scrolling. The status colours you already know (blue, green, orange, grey and red) are unchanged.

  • Sign in: a full-screen factory picture with a see-through panel showing the clock, date and the badge or employee number box. The on-screen keyboard opens below the panel.
  • Home: larger tiles with simple icons, a greeting, and a box at the top where you can scan or type a job number straight away.
  • Job screen: the operations list shows a colour key, and each operation's time and progress are easier to read. Job details sit in a tidy card with a larger job notes box, and the four steps are large buttons. The operations list is wider so instructions are easier to read, and you can hover over or tap an operation note or the job notes to see them in large text.
  • Work to List and WIP List: each job is a card in its status colour, with its details lined up in columns and planned dates shown as red or yellow labels.
  • Scan Progress and Stock: a clear prompt tells you what to scan.
  • Despatch, Lost Time and My Settings: jobs on Despatch are tidy cards that turn green when selected, Lost Time is an even grid of buttons, and My Settings shows your details and settings in two clear panels with simple on/off switches.
  • Easier to read everywhere: one font throughout, larger text on every screen, and job numbers and titles larger still, with everything lined up in neat columns.

Work/Service Order on the Jobs report

You can now show each job's Work/Service Order on the Jobs report. It is the number entered on the sales order's Order Info tab.

  1. Open Analysis > Jobs Reports and choose a report.
  2. On the Export Data Setting tab, tick Work/Service Order. It is next to Status.
  3. Save, then run the report or export it to Excel.

The option appears when Work/Service Order is switched on for your system, as it is on the sales order screen.

Search by job number on the planning sheet

You can now find a job by its number when building a planning sheet, instead of scrolling or filtering to it.

  1. Open Planning Sheet and go to the New Planning Sheet tab.
  2. Choose the oven, then type all or part of the job number in Search By Job No, at the top right.
  3. Tick the jobs you want. Ticked jobs stay ticked when you search for the next job number.
  4. Click Save to add all the ticked jobs to the sheet.

The search works together with the other filters on the screen, and only shows jobs that can run on the selected oven.

Mark customer specs as subcontract

You can now mark a customer spec or standard as Subcontract, so you can keep specs for processes you send out alongside the ones you do in house.

  1. Go to Data > Quality > Customer Spec/Standard and open a spec, or click New.
  2. Tick Subcontract and save.
  3. To see only subcontract specs, tick Subcontract Only above the spec list.

Subcontract specs are offered when you set up subcontract operations, and in-house specs when you set up in-house operations. You can change the tick on the latest issue of a spec, and a new issue keeps the setting of the one before.

Customer notes on delivery note certificates

Notes on a customer's Communication tab that are ticked Show on Cert now print in the certificate note on that customer's delivery notes (template 50), above any note typed on the delivery note itself. Nothing changes for customers with no such notes.

Operation notes on the touch screen

A new option on the touch screen shows the route's operation note against each job operation, so operators see the instructions for the step they are on. It is set per user and is off until it is switched on. Touch screen jobs now also show the part description.

Auto FAIR for parts not processed recently

DNA can now flag a First Article Inspection when a part hasn't been processed for a while. Switch on Auto FAIR and set the number of months (24 by default).

  1. Go to My Company > Customisation > Quality.
  2. Tick Auto FAIR and enter the number of months.
  3. Save.

When you add the part to a sales order line, if its last completed job is older than that, DNA ticks FAIR Required on the line and shows a message with the last completed date. When the job is raised, it is marked FAIR Required and FAI Required is ticked on the part. Parts that have never been processed are not affected.

Fixes

AreaWhat was wrongWhat happens now
StockA material's Current Stock could fall below zero after stock-outsA stock-out can't take more than is left on a goods-in note (GIN). Stock levels are recalculated after every stock movement and never show below zero.
JobsCancelling a job did not always book its allocated stock out, as it did in V49Cancelling a job books out what was allocated to it, minus anything already issued, so stock is never issued twice
Internal rejects (rework)Operations added to a rework route after the reject was first saved were missing from the job, so the printed job card started part-way throughSaving the reject adds the new rework operations to the job, so the job card prints every rework operation
Job costingSome costs on assembly jobs, split jobs and rejects were calculated or saved incorrectlyAssembly, split-job and reject costs are calculated correctly
Jobs reportJob Value could show as 0Job Value shows the correct value, in the list and in the summary and chart views
Sales ordersDate Docketed, Date Received and other details could be blank after saving, when the system was busyAll details on the Order Info tab are saved every time
Purchase ordersWith PO approval switched on, Complete all Items could not be clicked on an approved purchase orderComplete all Items works on approved purchase orders until the order is completed or cancelled
Release notesThe Release Notes button at the top of DNA showed a connection errorThe button opens the DNA release notes on the Fit Factory support site, in your usual web browser
HelpThe Help button and the F1 key opened a page that no longer existsHelp and F1 open the Fit Factory support site, in your usual web browser
Sales ordersOpening a sales order or one of its lines showed empty boxes marked "Mandatory Field" for a few seconds before the details appearedThe screen shows "Loading..." until everything has arrived, then the complete order
Sales ordersSearching the order list for text containing & or other symbols could return the wrong ordersThe search finds orders containing exactly what you typed
Customers and suppliersA very long customer or supplier name could stop a sales order, quotation or purchase order savingNames of up to 500 characters save normally
SageCredit notes sent to Sage were posted as sales discountsCredit notes are posted to Sage as sales credit notes
PartsA document with an unusual file name could stop a part's Documents list loadingThe list loads and shows every document
PurchasingThe purchase list could show an error for a requested material whose supplier had no price unit setThe item shows with its requested quantity
JobsSearching or changing page quickly on the job list could mix rows from different searches, and Batch Process or Complete could act on the wrong jobs after sortingThe list always shows the latest search, and the batch actions use the jobs you selected
ToolingTools with no usage remaining figure could not be returned to stock: the touch screen showed an error at the end of an operation, Return on the job's Allocated Tooling tab said "Save failed", and usage added by hand was not keptThese tools return to stock normally from the touch screen and the job, and usage history added by hand is saved
JobsSplitting a job, reverting it to WIP or de-allocating stock could leave component stock showing as used, or remove other jobs' stock-out history, so the job could not be allocated againEach action only changes the stock used by that job, and split jobs share the used stock between them
JobsWhen an assembly used only some of a WIP job allocated to it, the job was split but the wrong piece was used up: the larger remainder was marked consumed and the allocated piece stayed in WIP, so available stock showed too lowThe allocated quantity is consumed and the remainder stays in WIP, available to allocate
Starting DNAAfter logging in, the whole DNA window could be locked for up to about 2 minutes while "The system is being initialized" showed, usually the first time DNA was opened after an updateThe window can be used straight away. If you open a screen before DNA has finished loading, it shows "Loading..." briefly and then opens

Improvements

  • Currency symbols on approvals. Order totals on Approve Purchase Order show the supplier's currency symbol, for example €1,250.00. The symbol comes from the supplier's currency setting, as on the printed purchase order.
  • Total Price on subcontract approvals. Approve Subcontract Order has a new Total Price column, with the currency symbol.
  • Refreshed login and home screens. New product logos in Fit Factory orange, and a new background picture on the home screen.
  • A cleaner main window. The blue bar along the top now runs the full width, with the Fit Factory logo, Release Notes, Help and Logout sitting on it. Each button has a colour-coded icon: amber for Release Notes, green for Help, red for Logout. The menu strip on the left has a light carbon-fibre finish, the selected menu tile is Fit Factory orange, and the Home button at the bottom left is an orange house.
  • Transport-safety statement on delivery note 52. The driver's signature box on delivery note template 52 now reads "Goods received by and satisfied that is safe for transport", centred across the box.
  • Faster sales order list. The order list opens and pages noticeably faster, especially with many live orders.
  • Internal spec issue on delivery note 64. Delivery note template 64 shows the internal spec's issue number next to the spec.
  • Specifications under each line on quotation 30. Quotation template 30 now shows each line's processes and customer specifications directly under that line, centred, instead of in one block above the table, so it's clear which specification goes with which part. The page is also centred properly on A4.
  • Docketing lines in order, with quantities. On the Docketing screen the line list now runs in number order (1, 2, 3 … 10, 11) instead of 1, 10, 11 … 2. A new Quantity column shows each line's quantity next to its line number, so you can check a large order without opening every line.
  • Works with Sage 50 Accounts v34. DNA and the Sage Tool now connect to Sage 50 Accounts v34. After upgrading Sage, choose Sage 50 (V34) under My Company > Sage and install the matching Sage Tool. Your existing Sage data path keeps working; there is no need to change it.

Updating to V50

  • Fit Factory installs the update on your DNA system, including a small database update. You don't need to do anything.
  • Close and reopen DNA after the update. It downloads the new version automatically.
  • To check your version, open Help > About. It should show version 50.
  • Existing Jobs reports are unchanged. Work/Service Order is off until you tick it.

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article